Instant start
The volume of the printing chamber is small so you do not have to wait for the removing O2 from it. The printing starts once you are ready to start.
Small printing volume is good if you print small parts and do it on the regular basis. It reduces the powder turnover, remaining it's quality for a longer time. Instant start and small printing area increase printing speed, allowing to get parts in 20-30 minutes or even less.
All the features of major modells are here
300W IPG Photonics fiber laser
We use only the best lasers for any of our printers, with long term stability.
Custom firmware and hardware
We take the more of every component with our custom firmware. Custom hardware makes it even more efficient.
Absolute encoders
Absolute encoders for better stability even after power loss. You can pause printing for weekend and restore the process at ease.
C5 grade precision ballscrews
Precision ground ballscrews guarantees equal layer's height to get better models uniformity and less porosity.
Print master
Easy but powerful software which makes you start printing as an experienced user.
Materials library
Predefined programs for selected materials. To get better and reliable results in every print.
Functional characteristics
Cylindrical
building volume
100mm height
(4")
300W laser
more than you might need
ø90mm
(more than 3 1/2")
220V/12A
(ask for 110V)
Argon
inert atmosphere
865mm
width / 2.5ft
840(780)mm
length / 2.1ft
1850mm
height / 5,7ft
